Medtronic 500 T Operations Instructions download pdf (Page 22)

14 LIFEPAK 500T AED TRAINING SYSTEM Operating Instructions

Setup

AUTO ANALYZE Auto Analyze options are 1, 2, or OFF.

•1

Press ANALYZE to begin the first simulated

analysis of each set of three consecutive

simulated shocks. The AED Trainer automatically

begins analysis for the second and third simulated

shock in each three-shock set. After the Initial

CPR Time period, the operator must press

ANALYZE again to start simulated analysis.

•2

All analysis cycles begin automatically. To

simulate the look of a two-button LIFEPAK 500

AED, the black sticker may be placed over the

ANALYZE button. CPSS cannot be activated with

the remote control in this mode.

• OFF

The operator must press ANALYZE to initiate every

analysis.

Note: When Stack Shocks is set to

OFF,

AUTO ANALYZE 1 functions the same as AUTO

ANALYZE OFF

PULSE CHECK This option determines when pulse check

prompting is allowed.

NEVER

• NEVER

All prompting for pulse checks is removed.

•AFTER SECOND

NSA

Pulse check prompting is allowed after the

second and all subsequent

NO SHOCK ADVISED

decisions, but not after shocks.

• AFTER EVERY NSA

Pulse check prompting is allowed after every NO

SHOCK ADVISED

decision but not after shocks.

•ALWAYS

Pulse check prompting is allowed after CPR, NO

SHOCK ADVISED

decisions, and shocks.

PULSE PROMPT This option determines which voice prompt (and

LCD message) is presented to tell the operator to

check the patient for signs of circulation. Checking

for signs of circulation is important after a

SHOCK ADVISED

decision, after three sequential

shocks, and after a CPR interval.

Note: The Pulse Prompt setting is not

applicable when Pulse Check is set to

NEVER.

Note: The Pulse Prompt setting availability

depends on the language configuration.

1–CHECK PULSE

Table 4 AED Trainer setup options (Continued)

Setup Option Description Default Setting

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 41 42

Comments to this Manuals

No comments

Medtronic 500 T Operations Instructions Page 22

Comments to this Manuals