Medtronic 500 T Operations Instructions download pdf (Page 27)

LIFEPAK 500T AED TRAINING SYSTEM Operating Instructions 19

Setup

Configuring Pulse Check

1 In setup mode, press

ANALYZE until the PULSE CHECK screen appears.

2 Press

S to scroll through the following available settings:

• NEVER

•AFTER SECOND NSA

• AFTER EVERY NSA

•ALWAYS

3 When the desired setting appears, press ANALYZE to save your selection and proceed to the

next setup option, or press

ON/OFF to save your selection and exit setup mode.

Configuring Pulse Prompt

1 In setup mode, press

ANALYZE until the PULSE PROMPT screen appears (on AEDs distributed in

the English language only).

Note: The Pulse Prompt setting is not applicable if Pulse Check is set to

NEVER.

2 Press

S to toggle through the following available settings:

•1–CHECK PULSE

•2–CHECK PATIENT

• 3–CHECK FOR SIGNS

3 When the desired setting appears, press ANALYZE to save your selection and proceed to the

next setup option, or press

ON/OFF to save your selection and exit setup mode.

Configuring CPR Time 1 and CPR Time 2

1 In setup mode, press

ANALYZE until the CPR TIME 1 or CPR TIME 2 screen appears (on AEDs

distributed in the English language only).

2 Press

S to scroll through the following available CPR time settings: 0, 15, 30, 45, 60, 90, 120,

180 seconds, or 999 (infinite CPR time).

3 When the desired time appears, press

ANALYZE to save your selection and proceed to the next

setup option or press

ON/OFF to save your selection and exit setup mode.

Note:

CPR TIME 0 is not available if AUTO ANALYZE 2 is selected.

PULSE CHECK

NEVER

PULSE PROMPT

1–CHECK PULSE

CPR TIME 1

120

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 41 42

Comments to this Manuals

No comments

Medtronic 500 T Operations Instructions Page 27

Comments to this Manuals