Medtronic 500 T Operations Instructions Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 42
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
LIFEPAK 500T AED TRAINING SYSTEM Operating Instructions 13
© 2002-2007 Medtronic Emergency Response Systems, Inc.
Setup
STACK SHOCKS When set to OFF, the Stack Shocks option
eliminates the analysis after each shock and
inserts prompting for CPR after each (a single)
shock. This eliminates the three-shock stack.
CPR is prompted after the shock regardless of the
ECG rhythm. The CPR time following the shock is
determined by the
CPR TIME 1 setting selected.
Choices for the Stack Shocks
option are ON or OFF.
OFF
INITIAL CPR This option prompts the operator to START CPR or
to proceed to analysis immediately.
OFF
OFF
The CONNECT ELECTRODES prompt displays.
ANALYZE FIRST
The device proceeds to analysis if electrodes are
applied. If device protocol is set to an initial
SHOCK ADVISED decision, the prompt continues
with
IF YOU WITNESSED THE ARREST, PUSH X (right
arrow). If the device is set to a
NO SHOCK ADVISED
decision, the prompt is
START CPR.
CPR FIRST
The START CPR prompt displays. When electrodes
are connected (before or during CPR), the prompt
continues with
IF YOU WITNESSED THE ARREST,
PUSH
X (right arrow), which initiates the analysis
process. If the operator does not push
X, the
countdown continues for the Initial CPR Time
period.
INITIAL CPR TIME This option applies to the setting for Initial CPR.
The time choices are:
15, 30, 45, 60, 90, 120, or
180 seconds.
120
PRE-SHOCK CPR
TIME
Pre-shock CPR is inserted after a SHOCK ADVISED
decision to prompt the operator to perform CPR
while the device is charging. The choices are:
OFF,
15
, or 30.
OFF
OFF Following a SHOCK ADVISED decision, the device
charges with no CPR prompt.
15 or 30 Immediately following a SHOCK ADVISED decision,
the operator is prompted to START CPR. The
countdown timer begins for 15 or 30 seconds,
depending on setting.
Table 4 AED Trainer setup options (Continued)
Setup Option Description Default Setting
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 41 42

Comments to this Manuals

No comments