Medtronic 500 T Operations Instructions download pdf (Page 25)

LIFEPAK 500T AED TRAINING SYSTEM Operating Instructions 17

Setup

Entering Setup Mode

1 Make sure the AED Trainer is turned off.

2 Press and hold

S (up arrow) and X (right arrow) while pressing the AED Trainer ON/OFF

button.

The message

SETUP MODE and the installed software version appear briefly, and then the SHOCK

PROTOCOL

screen appears.

Note: For two-button devices (black sticker covers

ANALYZE button), press the black sticker

instead of the

ANALYZE button in the following setup procedures.

Configuring Shock Protocol

1 After entering setup mode, the

SHOCK PROTOCOL screen appears.

2 Press

S to scroll through the following shock protocol options (the protocols are described in

Table 3 on page 10):

• CUSTOM #1 (SSSSSSSSS)

• CUSTOM #2 (SSSSSSSSS)

• FIXED #1 (SNNN)

• FIXED #2 (SSNN)

•FIXED #3 (NSNN)

• FIXED #4 (NNNN)

3 When the desired protocol appears, press ANALYZE to save your selection and proceed to the

next setup option, or press

ON/OFF to exit setup mode (the display flashes and your selection is

saved).

Configuring Custom Settings

To change the settings for CUSTOM #1 or CUSTOM #2:

1 Press

S until CUSTOM #1 or CUSTOM #2 appear on the display.

2 Press X to display a cursor ( _ ) under the first letter (S or N).

3 Press S to toggle between S (shock), N (no shock), or blank.

4 Press X to move the cursor to the right.

5 Repeat steps 3 and 4 until the shock protocol is configured as desired.

6 Press

ANALYZE to save your selection and proceed to the next setup option, or press ON/OFF to

save your selection and exit setup mode.

Configuring Stack Shocks

1 In setup mode, press

ANALYZE until the STACK SHOCKS screen appears.

2 Press S to toggle between

ON or OFF.

3 When the desired setting appears, press

ANALYZE to save your selection and proceed to the

next setup option, or press

ON/OFF to save your selection and exit setup mode.

SHOCK PROTOCOL

CUSTOM #1 SSSSSSSSS

STACK SHOCKS

OFF

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 41 42

Comments to this Manuals

No comments

Medtronic 500 T Operations Instructions Page 25

Comments to this Manuals